8" Small Industrial Touch Screen LCD Monitor
Model: JWS080-M-QD
Jawest 8 inch industrial flat panel monitor provides a high-quality display and constant data stream of information about all areas of your operation and becomes a crucial part of industrial sites and commercial applications systems, such as display and control devices in smart homes and intelligent car systems. This industrial monitor with LCD touch screen display, adopts circular chamfering, general frame design, more fittable for operation. Besides, this kind of design style supports a variety of installation methods, such as desktop, cantilever, wall-mounted, embedded.
Jawest industrial monitor features
● Resolution: 1024x768.
● Screen brightness 350nit-1500nit, support direct sunlight readable.
● 24/7 stable operation with long service life.
● Aluminum alloy material enclosure for good heat dissipation.
● True flat screen and a whole sealed bezel, IP65 dustproof and waterproof.
● Stable running in shock and vibration, electromagnetic interference, and radiation application.
● OSD design for brightness adjustment.
● Adopting the REALTEK brand industrial-grade display chip and industrial-level components for the monitor's perfect performance.
FAQ
1. What's kinds of installation methods does your industrial monitor support?
- Embedded mount, wall-mounted, desktop, VESA 75/100, open frame, stand, etc.
2. How long is the warranty for your industrial monitor?
- Three-year warranty.
3. How long will I get your products?
- For the standard models, 3~7 working days after payment;
- For OEM/ODM orders, 10~15 working days after payment.
4. Why does the industrial monitor can normally display, but there is no response when touching the screen?
- Firstly, check whether there is a crack on the surface of the touch screen. If the screen cracks, it should be replaced in time; secondly, it is necessary to check if the surface of the touch screen covered dirt or oil, sometimes these factors will affect reflection speed or cause a short circuit. Thirdly, check Whether the wiring connection is loose or not; also it needs to check whether the serial port and the interrupt number have conflicts. If there is any conflict, adjust the resources. Then observe that the indicator light on the
the control box is working properly or not, generally, the indicator light is green, and flashing means it is normal.
5. Why does the industrial display screen has no light after the power is turned on?
- If you touch the industrial display screen with your hand, but the buzzer does not respond, which means the program is not working properly. Using a multimeter to measure several sets of voltages. If they are all normal, then the problem may come from the chip circuit, it causing the bus to be wrong and the program will not run normally. Besides, Check if there is a chip solder joint, and use a heat gun to heat the solder fillet and press it with tweezers to re-melt the solder fillet and tin. After the process is restarted and returns to normal.
Industrial Monitors Knowledge Expansion:
What role does the resolution play for the industrial monitor?
Size and resolution play a role in the overall readability of industrial monitors. In general, 7", 8", 10.1", 10.4", 12", and 15", 17", 19",21.5" LCDs are mostly used in industrial monitor applications. It provides enough space for views, signal waveforms, or other graphical data, and won't take up too much space on the device.
The resolution requirements are mainly determined by displaying information or displaying data. In the past, VGA, and XGA resolutions were the most popular in the industrial monitor market. However, more and more monitor manufacturers are beginning to pay attention to the profits of large aspect ratio displays, such as WVGA and WXGA. The large aspect mode allows users to view longer information waveforms and more data on a single display.
